Electric Vehicles

Evaluation of Potential Hybrid Electric Vehicle Applications: Vol I

Gris, Arturo E.
1991

Identifies potentially promising market segments for electric and hybrid vehicle technologies; covers topics including energy and power requirements, battery and range extender, propulsion system, and air conditioning

Design, Modeling and Control of Steering and Braking for an Urban Electric Vehicle

Maciua, Dragos
1996

This report describes research which involved the design modification, modeling and control of automatic steering and braking systems for an urban electric vehicle. The vehicle is equipped with four-wheel independent drive, four-wheel independent braking and four-wheel steering. Control algorithms were developed for steering and braking. Simulation results show the feasibility of the algorithms.

Charging up the Central Coast: Policy Solutions to Improve Electric Vehicle Charging Access in Watsonville

Sarode, Shruti, MS
Segal, Katie, MPP
Elkind, Ethan, JD
2023

California's goal to eliminate internal combustion engine sales by 2035 poses challenges for lower- and moderate-income residents, hindering their access to electric vehicles (EVs). Barriers include limited EV charging stations, exacerbated by lower home ownership and inadequate grid infrastructure in lower-income communities. To address this, UC Berkeley School of Law's Center for Law, Energy & the Environment (CLEE) partnered with the City of Watsonville. Due to its location, demographics, and ambitious policy goals, Watsonville represents a potential model and case study for...

A Nonlinear Fractional-Order Dynamical Framework for State of Charge Estimation of LiFePO4 Batteries in Electric Vehicles

Borah, Manashita
Moura, Scott
Kato, Dylan
Lee, Jaewoong
2023

An efficient state of charge (SOC) estimation for LiFePO4 batteries in electric vehicles (EVs) has been an open problem so far, largely due to its non-measurable nature. This paper tackles this problem by presenting a fractional-order (FO) dynamical framework to unravel and understand the inherent dynamics of the LiFePO4 battery which leads to an improved estimation of SOC. First, a FO model (FOM) is proposed where the parameters are introduced as nonlinear functionalities of SOC. It has been observed that the FO defined as a nonlinear function of SOC is crucial in identifying its...

Evaluation of Incorporating Hybrid Vehicle Use of HOV Lanes

Brownstone, David
Chu, Lianyu
Golob, Tom
Nesamani, K.S.
Recker, Will
2008

This report presents a method to investigate the operational and environmental effects of the policy of allowing qualified single-occupancy hybrid vehicles to use dedicated High-Occupancy Vehicle (HOV)/carpool lanes in California.. The method combines the traditional planning method with microscopic simulation modeling. The planning method is used for demand estimation and analysis and the microscopic traffic simulation modeling method is used for accurate measures of the system. The study employs a microscopic traffic simulation model that is capable of evaluating the HOV/hybrid system...

Fuel Saving Achieved in the Field Test of Two Tandem Trucks

Browand, Fred
McArthur, John
Radovich, Charles
2004

The fuel consumption of two tandem trucks is recorded for truck spacings of 3, 4, 6, 8, and 10 meters. The trucks are linked by means of an electronic control system, and are operated on an unused runway at Crows Landing, California. Fuel consumption data is averaged while traveling in both directions over the same central strip of runway to cancel the effect of runway slope and to partially cancel the effect of wind. The average fuel consumption saving to be achieved by tandem operation varies from about 11% at 3-4 meters spacing to about 8% at 8-10 meters spacing.

Task A-2: Implementation and Management of Electronic Roadway Tolling: Lessons from Successful Cases

Kalauskas, Rebecca
Taylor, Brian D.
Iseki, Hiroyuki
2009

Over the past decade road pricing has moved from the drawing board to practice in projects large and small around the world. But while interest in and experience with electronic roadway tolling is on the rise, political acceptance is not yet widespread and standard models of implementation and management have yet to evolve. Accordingly, this report examines a variety of road pricing projects– some that were smoothly implemented, and others that encountered significant obstacles along the way. Based on these cases and a thorough review of the literature, we draw lessons to guide future...

TASK A-3: Examining the Linkages between Electronic Roadway Tolling Technologies and Road Pricing Policy Goals

Demisch, Alexander
Iseki, Hiroyuki, PhD
Taylor, Brian D.
2009

The surge of road pricing projects in the U.S. and around the globe over the past fifteen years has been enabled by a set of new communication and transportation technologies. There is currently a wide array of technical configurations ranging from systems based on “tried and true” short-range radio communications to experimental systems relying on global positioning satellites. These technologies provide for a more efficient collection of simple tolls, and also facilitate a movement toward more dynamic, variable user fees.In this study, we provide a comprehensive literature review of...

Roadway Powered Electric Vehicle Project Track Construction And Testing Program Phase 3D

Systems Control Technology, Inc.
1994

This report covers the construction and testing of a Roadway Powered Electric Vehicle (RPEV) proof-of-concept system. The test facility was built at the University of California Richmond Field Station. The facility has a 700-foot test track and an operational 35-passenger RPEV. The report contains an introduction to the concept of RPEV and discusses the following aspects of the project: systems engineering and design, vehicle, facilities, testing, related RPEV research, and control circuits.

Roadway Powered Electric Vehicle Project Parametric Studies: Phase 3D Final Report

Systems Control Technology
1996

This study looked at the application of electrification and automation to freeways in the Los Angeles region. The report is broken down into the following sections: Development and Enhancement of Analysis Tools, Inductive Coupling System Design, Value Engineering of Roadway Cores, and Economic Analysis of Roadway Powered Electric Vehicle (RPEV) Technology.