Trucks

Evaluation of Bus and Truck Automation Operations Concepts

Tsao, H. S. Jacob
Zhang, Lan
Lin, Lin
Batni, Deepa
2004

Traffic congestion will continue to worsen and likely worsen at a faster rate than ever. People throughput and freight throughput have become critical issues for California and the rest of the nation. PATH has funded with approximately $125K a research project entitled "Evaluation of Bus and Truck Automation Scenarios" jointly proposed by Jan Botha (Principal Investigator) of Department of Civil and Environmental Engineering and Jacob Tsao (Co-PI) of Department of Industrial and Systems Engineering at San Jose State University. This report summarizes the major findings of the research...

Fuel Saving Achieved in the Field Test of Two Tandem Trucks

Browand, Fred
McArthur, John
Radovich, Charles
2004

The fuel consumption of two tandem trucks is recorded for truck spacings of 3, 4, 6, 8, and 10 meters. The trucks are linked by means of an electronic control system, and are operated on an unused runway at Crows Landing, California. Fuel consumption data is averaged while traveling in both directions over the same central strip of runway to cancel the effect of runway slope and to partially cancel the effect of wind. The average fuel consumption saving to be achieved by tandem operation varies from about 11% at 3-4 meters spacing to about 8% at 8-10 meters spacing.

Command Modification Using Input Shaping for Automated Highway Systems with Heavy Trucks

Bae, Hong S.
Gerdes, J. Christian
2004

Automated vehicles require sufficiently accurate system models in order to achieve a desired level of closed-loop performance in, for example, automated highways systems or smart cruise control systems. Parameters of the models are one of the important factors that determine the accuracy of system modeling and, eventually, the overall performance of the closed-loop system. Current GPS sensing technology enables estimation of road grade and, consequently, simple treatment of parameter estimation from a static force balance. This work has demonstrated that road grade can be reliably...

Evaluation of Truck and Bus Automation Scenarios: Operations Cost Analysis

Botha, Jan
Day, Jennifer E.
Adibhatla, Nagabhargavi
2004

Automated bus and truck systems hold the potential to improve road safety by eliminating some human error, increase the vehicle throughput by allowing vehicle convoying to shorten headways, and reduce costs associated with infrastructure, user time, and drivers. In this study, an automated bus system (ABUS) was compared with more-conventional light rail and bus-on-dedicated-lane (BDL) alternatives. A cost comparison (excluding accident costs) was also made among an automated freight trucking system (AHS-Truck), a no-build base condition, and configurations involving the addition of a...

Coordination Layer Control Design for Automated Trucks and Buses

Lu, Xiao-Yun
Joo, Sungmoon
Hedrick, Karl
2004

This project studies the coordination layer control and decision making for automated trucks and buses. Maneuver design and coordination algorithms need to take several factors into consideration. Practical achievement in this project includes the following: automated ground vehicle maneuver coordination; maneuver design for automated trucks/buses; model-based simulation package development for control design and real-time code development.

Intermodal Transportation Operation System ( ITOS ) For The State Of California

Hall, Randolph
Parekh, Chethan
Thakker, Viral
1998

Intermodal transportation entails the coordinated movement of different types of transportation (rail, truck, automobile, etc.) to serve the needs of travelers and shippers. The purpose of this report is to provide a vision for systems to coordinate intermodal operations in California in the future, and also to document the types of systems that are being used today in a range of transportation modes. An intermodal system could, conceivably, establish a center (or centers) that is responsible for the joint operation of multiple modes of transportation. This is not our preferred vision....

Historical Transportation Development

Garrison, William L.
2003

The main tasks for this overview of transportation development are the provision and interpretation of information on the unfolding of the transportation systems. What have been the processes at work? What explains the similarities and differences from here to there and among systems? Big questions! But they are eased by ways systems are products of experiences, as will be seen when the paragraphs immediately following summarize early experiences. Life support systems, sustainability, and social development topics will be mentioned. After examining their immediate precursors, the...

Unintended Impacts of Increased Truck Loads on Pavement Supply-chain Emissions

Sathaye, Nakul
Horvath, Arpad
Madanat, Samer M.
2009

In recent years, the reduction of freight truck trips has been a common policy goal. To this end, policies aimed at influencing load consolidation, load factors and increasing maximum truck weight limits have been suggested and implemented, resulting in higher gross vehicle weights. The purpose of such policies has generally been to mitigate congestion and environmental impacts. However, trucks cause most of the damage incurred by highways pavements. The supply chain associated with pavement maintenance and construction releases significant air emissions, raising the question of whether...

Organizing For Its: Computer Integrated Transportation Phase 2: Results For Commercial Vehicle Operators

Hall, Randolf
Chatterjee, Indrajit
1995

This paper extends previous research on Computer Integrated Transportation (CIT) to commercial vehicle operations (CVO), specifically to examine how government can work with trucking companies within a CIT framework. The research entailed a review of how government currently interacts with trucking companies, interviews with trucking terminal managers, and case-studies on terminal operations at five of the nation's largest motor carriers. Opportunities are identified in the area of unifying interaction between government and industry and in the area of in- vehicle devices for automated...